Pages

Tuesday, July 10, 2012

Slimey the Worm - Tutorial

Since my original post 4 years ago (gasp!) I have received so many inquiries regarding my Slimey the Worm replicas.  Well I've finally gotten around to creating a tutorial on how to make one of your own.  He is very easy to make and requires very few supplies.


Materials:
Upholstery foam or Memory Foam
Sharp Scissors
Light Orange, Dark Orange and Red Acrylic Paints
Paintbrush for acrylic paints (or any small brush with stiff bristles)
Wire
Small scrap of pink paper
Glue
Black Puffy Paint (or two black beads)

Instructions:
 Step 1:  Cut a piece of upholstery foam or memory foam no smaller than 1 1/2"wide x 6" long.  (I was short on foam one day so I actually cut a piece off of my husbands memory foam pillow...tee hee.  You can't even notice it's gone!)


Step 2:   Trim the foam down into an oblong cylinder shape with the scissors.  Make the cylinder as smooth around as possible with no ridges.  The worms I make are about 3/4" wide and 5 1/2" long. 




Step 3:  Paint the worm with a watered down light orange.  Squeeze out the excess paint and let it dry completely.


Step 4:  Paint the dark orange stripes onto the worm.  The stripes for either end of the worm could be about 1/2" wide and the stripes down the middle could be about 1/4" wide.  I try to make my worms with no less than 9 small stripes.  Let the paint dry completely.




Step 5:  Cut a slit on one end of the worm for the mouth.  The slit should be about 6/16" from the outside so that his lower jaw is much smaller than the top of his head.  The slit can go back as far as the dark orange paint (so about a 1/2" deep).  


Step 6:  Paint the inside of the worm's mouth red.




Step 7:  Insert the wire into the worm's back side, right through the middle of the cylinder.  Draw it up into the lower jaw.  Cut off the excess wire making sure that none of it will stick out when the worm is bent and posed.


Step 8:  For the tongue, cut out a small, but fat, heart shape from the pink paper.  Round off the sharp tip of the heart.   With a small dab of glue, place the tongue in his mouth with the bottom of the "heart" facing out.




Step 9: Place two drops of the puffy paint for the eyes on the top of the worms head.  They can be placed about 1/4" away from the end of the dark orange paint with 1/4" of space between them.  Let dry completely.




Prop him up onto a dirty pair of yard boots (or any old piece of trash) and your Slimey the Worm will make a great conversation piece!  Then surprise a Sesame Street fan by setting him up by the garbage can!  Awww...


Here is a picture and photo booth design by K.D. Kinkade.  One of my Slimey Worms completes her set perfectly.





8 comments:

  1. Thanks for the tut...very clever! I really laughed out loud when I read where you cut a piece of your husband's pillow....LOL. I just had to tell you that it really tickled my funny bone. I'm smiling as I'm writing.

    ReplyDelete
  2. I have to bookmark this and come back to give it a try.

    ReplyDelete
  3. you should make them and sell them

    ReplyDelete
  4. Hello there! My name is Valerie from Illinois and I have an autistic 10 year oldson that is absolutely INFATUATED with Slimey the Worm and has searched and searched the web to find ways to create his own Slimey (as well as the original Kermit from Sam and Friends) andwhen he found your page, he was beyond excited! Long story short, would you take money to make one of yourSlimeys? I would gladly private email you my info is so. Hope to hear back from you soon. Have blessed day.

    ReplyDelete
  5. As you can see, I am way tardy to the party. Citing most messages came in 2012 and 2014 being the most current! I hope you read this....

    ReplyDelete
  6. I really like it ! Easy steps, like amanda said, you should sell them or even make other Sesame Street characters! My daughter, who is 2, really loved slimy, which is one of her fav characters! Thanks for sharing this project

    ReplyDelete
  7. If you want an easier time with the foam shaping. soak it in water and put it in the freezer. When frozen you can shave the foam into shape and get a nice rounded shape.

    ReplyDelete

Thanks for visiting my blog and leaving a comment!